Southern Pacific #18 restoration – May 2014

Darwin 5-3-14 042
Larry is in the first row on the left.
Darwin 5-3-14 030
Larry enjoying a cold beer after work in April.

 

Before getting into the May work weekend we are saddened to report  that Larry Peckham, one of our biggest supporters, suddenly passed away on May 1. Aside from his interest in the #18 – which he remembered being put into Dehy park in 1955 – Larry was a big 4 wheel drive enthusiast. He was a lifelong bachelor and had been a resident of Independence for the final 67 years of his life. Aside from being at every work party as our “Safety officer” Larry had contributed over half of the money spent to date on the restoration. Larry’s smile and presence will be greatly missed. Larry was 72 at the time of his passing. A memorial and work party will be held in his honor on June 28th.

 

 

 

As for the work weekend over the 9-10th of May…. During the process of getting the spring rigging laced up, we realized two things that we had missed: The #2-3 springs were completely different from left to right, and the coil springs located behind the #3 driver were also all different sizes.

3 of the 4 coil springs showing the difference.
3 of the 4 coil springs showing the difference.

To remedy this issue we jacked the rear of the locomotive up slightly and removed the coil springs as well as the right rear leaf spring and are having all new made. While the weight is off the engine we also took the time to even up the spring saddles to compensate for the change in crown brass thicknesses. With the new springs installed this should really make the #18 sit and ride nicely.

The blocking sticking out from the wheels is currently supporting the weight of the locomotive.
The blocking sticking out from the wheels is currently supporting the weight of the locomotive.

In addition to the spring work, Scott and Bob spent some time installing the brake rigging and new brake shoes. Both the #1 and #2 brake beams and four shoes are installed and ready for the brake rods and #3 brake beam to go together next time. As far as running gear goes, things are really flying together despite the setback of the coil springs.

Meanwhile up in the smoke box the copper ferrals were all installed and the flues are ready for rolling on the next work days! While we will be taking most of June off we will be hitting the work hard in July and August so stay tuned.

Copper ferrals around each tube.
Copper ferrals around each tube.
New brake shoe
New brake shoe